Halls Hydro Jetting

When you have a stubborn clog that will not budge it is time to contact Halls hydro jetting service! Stubborn clogs simply do not respond to traditional methods like snaking the pipe. When you have a clog that won’t budge you have a couple of different options.

You can have your pipe cut around the clog but than you have to have the pipe replaced and coupled on to the rest of the pipe. In many cases that just opens up the door to more issues like leaks etc. You can use chemicals but that also has another set of problems. Sometimes the acids in the chemicals can cause very serious damage to the pipe and of course the chemicals have to go somewhere if they are able to get through the clog so you wind up with chemical waste in the sewage system.

The only real choice you have that will not cause any damage is the hydro jetting process.

High Pressure Water Clearing

Halls hydro jetting is really a very simple process that requires some professional expertise. Hydro jetting is the process of flushing out a pipe with a high pressure water supply to jar loose the clog. Hydro jetting can loosen just about any clog and remove debris from a pipe safely.

Safely is the key word because while the other methods mentioned above may remove the debris and clog from the pipe they will likely cause harm to the pipe resulting in a more expensive fix. Hydro jetting is a perfectly safe process that does not cause harm to the pipe or the sewer line.

The high pressure (3500PSI) water flushes the inside of the pipe and cleans out any debris. It is an environmentally friendly way to clean your pipes out! Of course for the process to work correctly you need the equipment and the know how! Not every plumbing service offers hydro jetting because they either do not have the equipment or the staff that is trained in how to properly use the equipment on hand.

Proper Use

Hydro jetting is a simple answer to a tough problem but being simple does not mean that it does not require the proper training. Proper use of the hydro jetting equipment is an absolute must because when it is not used correctly it can cause damage. 3500 PSI is a lot of pressure coming out of the hose so you do want to be sure you use an expert service like Halls hydro jetting to insure the safe unclogging of your pipes.