Knoxville Sump Pump

A sump pump is typically installed in to those homes that need extra help with pumping away excess surface water, water from melting snow and ice and ground water. This is usually because the house is built on a slope which will cause water to flow and collect around the base of the exterior walls of the property. In other areas, the water table can be extremely high, and a Knoxville sump pump can be used as a way of preventing water accumulation around the base of a home.

What is a Sump Pump System?

The majority of sump pumps comprise a pump that is situated in a pit or tank, which is located beneath the floor of a basement, and has a discharge pipe to allow the water to be dispersed. The pump will have either a single inlet hole, or several and it can be constructed out of many different materials. The pits themselves are usually made from cement, metal or plastic.

The sump pump is always located within the tank or pit, and it will consist of an electric motor and a water level float. The float will activate the pump when the water level reaches a certain level, which will help to prevent excess water accumulating and causing flooding.

When the pump is activated, the water is expelled through the discharge pipe, and there is no need to fit a vent pipe as the pump is discharging ground water not waste water from internal plumbing.

Sump Pump Problems

You may find that the sump pump is not working to maximum efficiency and there could be a number of reasons for this. It is possible that in extremely cold conditions that the discharge pipe has frozen and this will prevent any more water from escaping. Or there could be some form of obstruction in the discharge pipe, and this could cause the water to rise and flood your home.

If the Knoxville sump pump is making a lot of noise or vibration then this could be a sign that your pump may be in need of some maintenance, and that is when it is time to call a professional Knoxville sump pump repair team. Other problems could include a continuously running pump, which might indicate that the float level indicator is stuck, or there could be corrosion in some of the metal parts of the sump pump.

Read Our Articles On Sump Pumps